whata ya say skoot . you doin ahite this evening

yepp  i am great mayn an you

Yesir doin fine

glad to hear it  hows tha weather there gitten a little chilly round here last nite 42 an supposed to be 50 tonight

right bout the same hear dude . warm days cool nights rite now . that will go on till around thanksgiving or after then it starts gettin purty cold and stays cold then on till round end of april or so

howdy kenny glad ya dropped in  

hows tha super sled of yours runnin

yeah myself . I hate to see this place so dead here lately . But what cha gonna do . Hey Kenny you stayin warm man with all them cold days yall already havin

dunno why nobody comes in here anymore

I dont either cause this is a great place to hang out . One of the best sites I have found for tech and chat with good company

well i think alot come in they just dont post for who knows why  

Dang kenny hate to hear that man . That sounds expensive for sure

well now that sounds like a plan

have ya dynoed tha thing yet

mayn my ole dog is purrin like a kitten tilled my garden a few weeks ago an planted.  purty much put the ole girl up for tha winter unless its as dry as last year

yep yep got all the tractor work done for a month or so they all runnin well so far .the ol farmal M needs an alternator the john deere b needs a coat of paint and an intake manifold but other than that is runnin swell and the actual farm tractor Zetor is doin its job farmin right along

dont look now but the boss is in

Hell I used an Oliver yesterday with a stacker head to unload my lathe and two of my big tool boxes.  It is setten out side the shop as we type.  Pretty redneck for a harley guy to use farmen equipment.  lol

Bummer bout that head CKenny...

And yes it is Black Widow that owns all of Siftons old profiles now.  That is what I have in my Pan.  It is the old Sifton 440 Crusader...Black Widow calls it something else but it is the same cam.

yep I got a sifton 460 sumthin in the old chopper . hey them olivers are sum sweet rides there ding

Oh an fer da flatlander (no offence) It ain't been above 40 here in bout two weeks (dats daytime, nite been hit the high twenties).  Snowed yesterday and is tryen to again tonight.  Had the furnace on for the past month or so.  

Sure am glad this new shop has radiated floor heat.

brutha shawn ya gotta warn me earlier mayn     he done caught me bein a fool   :rofl    howdy dinger  

who you callin a flat lander heheheeeheeeee

my life story brutha always a day late and a dollar short

Anyone who live below 5000 feet...lol

well now im hurt im gonna have ta get another beer to calm myself

lol...now now don't go getten all feeled hurt on us....I is just ribben ya'll.  lol    Must be the thin air up here.  lol

please do it helps

Kewl Kenny.  I would be interested in what he has to say.

I have stewed over those pics ya sent on honing....I think I might have a way to even out the heat build.

I think I will cut some flanges from aluminum to clamp down on the base flanges.  I think the Aluminum will work as a good heat sump and pull the heat away from the flanges.  I am hoping that clamping it on and the fact that it is aluminum it will transfer the heat as well as the cast fin housing of the top part.

What do ya think?

hey guys I want yall to look at all them names up there . wooohooo

mayn im gitten tha (i think dads drunk) eye  cause im laughin so hard  

you stinkin drunk

lol...  Yep I get that too.  lol

are you anebriated skoot

I'm setten at 6900 here Ken.   But cause we are a little further north than you our winter is hitten already.  

naww just laughin at this bs   an its been so long they forgot

"I have stewed over those pics ya sent on honing....I think I might have a way to even out the heat build."

  hey doesnt that all change once the engine fires........

later kenny

nite nite kenny and good luck tamara

Yep and that is what the problem is Skoot.

The heat from the hone isn't dispersing evenly throughout the cylindar.  The bottom flange that goes into the cases heats up fast and that metal swells.  The upper portion of the barrel that has cast iron and fins absorbse and disperses the heat.

When ya stick a bore gauge in the cylindar to see how the cut is...the bottom will read that it is ok but as soon as the cylindar cools the bottom shrinks and you have a "tight" cylindar.

I think, don't know but it is what I suspect, that is why so many machinist try and tell you that a Harley bore is tapered.  I don't think so!  

Bottom line is that this "Tight spot" will lead to accelerated piston skirt wear.  And that is a bad thing.

yeah i get what yer sayin im laernin bout these infared pics an just spongin mayn if ya catch me   i was an engin machinist for 6 years (cars) but understand the process

Yeah and on a block you have all that iron around the cylindars so the heat is absorbed.  Not the case on v-twin.  And an interrupted bore is even more of a b**** (two strokes).

but ya can see the interesting cunundrum this presents.  lol  (I used that word just to mess with ya)

well actuall ya get that on a water cooled engine too just not as exterme   the middle is thin an the top an bottom are thicker so ya hone the top an bottom then wait a few minutes gauge it then finish it  

Yeah true...that is why we dwell on top and bottom....lol.

I gotta crash guys.

I painted all day and I am hammered.

Later

later mayn

The next generation of night vision is a combination of IR and Starlight.  It is really kewl and AMAZINGLY detailed.  The great thing about this stuff is that the current night vision goggles and scopes can be defeated by most smoke and dust...the new chit with the IR in it as well wont have that problem.  It is some really kewl chit man.

sweet mayn so i can kill deer at night.......;D

whoa, too bad.  fix em up.

Quiet here, snow and shtt.

Crac

Snow ? damnit man that has got to suck

I just moved from south of Buffalo, NY. Got out just in time. They had some sort of wierd storm that put down 20" if heavy wet mess and really raised hell. Some of the family are still without power and digging out. Sure am glad I got out of there. Don't ever want to shovel again.

Snowed here too a little.  More cold than anything.  Like a dumbass I didn't get the fuel filters changed on the Ram and the lines gelled up.  I gotta go rescue the danm thing today.

oooh that aint good there Ding . Atleasts you got one of the new ones . I got one of the old 12 valves and the fuel filter is located all the way at the back of the injector pump right beside the brake booster pump as opposed to yours which is located right there in front . Now you wanna talk bout a b**** to change . Geesh ! Good luck thawin them suckers out there bro . I know that want be any fun especially when it is 40 below zero outside .

well bruthas im gonna run  later

dont rush off man . well have a goodun and we will catch ye a little later

yeah im tired an hungry more hungry than tired but ya know

yeah I know well eat till you are full as L and then b**** about it ahite . HAHAHA Later bra

what's up?
The little lady has been sick as a dog.  It's pretty sad.  All last night, yesterday and again tonight.  Screaming headache, backache, can't hold her water.  We have no idea wtf's up.

Crack

Well Crack, right now we are staying with friends in Heath Springs SC. Can't get into our house 'til sometime in January. That will be outside of Chester, SC.  Both places are about an hour south of Charlotte, NC so if the ol ever needs a shopping fix ......................

shopping fix????  SHUT YOUR MOUTH!
Man, I thought we stuck together here!

Got the Ram fixed.  Wasn't gelled up at all.  The relay for the fuel pump fell off the firewall and shorted out.  Caused the fuse to melt in the holder cause it was a little to big.  Replaced it with a breaker and changed all the fuel filters.  I got two Shawn...one on the tank and then the one on the motor.  Once all that was done just primed her up and away we went.  Still a pain in the a** though.  Oh yeah an I shocked the fuel with some anti gel and Heat to get the water out.  Should be fine now.  Part that really urinates me is that it shot my one day off to lay around and watch some football.  danm.  lol

I had the rubber on my injector pump solenoid get caught in the spring . This happening caused the solenoid not to lock in place like it is supposed to let the relay on the firewall rest . well it burnt out my relay so I had to buy a new one 65 bucks . Well that didnt fix the prolem cause I was still havein to engage the solenoid manually by pushin it up to lock it with my finger so it would crank . So to keep from havein to buy a new one which let me tell ya is 600 big ones took it apart just to look at it and found the piece of rubber that covers it rotted and hung in the spring . pulled it out lubed it a bit put it back and hatten had a prolem since . So take care of that solenoid cause they love the L out um and the dealer is the only place you can get it .

Sorry Cracky! I don't know what got into me. You would think by now that I would know better.

it's ok...just no saying the S#OPPING  word.

yepp this is a good bunch of folks an i just like to mess around  if i offend anyone just tell me

I do not know what any of you are talking about....but that old fart ding needs to put a current picture of his ugly a** on this site.  Especially since we have not seen him sice he left in july from SoCal.  Rumor has it that he is sporting long hair and a beard.......

Dragon Slayer



Rob

dunno he dont hang around long enough for us to git a good look at him

scoots.........i wants that truck of yurs.......wadda ya take for her LOL

I'm waiting on a 63 chev pu I heard about.  It's been in storage with mild body damage.

wild bill tha truck aint fer sale   we already bonded ( she made me bleed) she sure dont like this kooler weather though, gonna adjust the valves tamarraw an put in new plugs   feller has motocraft plugs in there   oughta be hung

   lets see them pics craker mayn

I am offended

well im sure theres medicine fer that dont be too sad

OK I am over it ! Thanks I needed that bra

what tha L is goin on mayn

nuthin much outa the norm . just gettin drunk talkin to yall fools watchin a little tube

well im drinkin a few cold ones an listenin to some cds  an talkin to a fool hahahahahhh

well now see there we doin the same thing just different

well since we tha only fools in here......

yeah it sure is quiet in here on the weekends now adays

noo sheeyat an its coolin off to

yeah I figured this little whole in the wall would be packed again by now but .....

dunno mayn dunno shovels ferever is boomin

yeah I guess they all over there

naww daed earlier been on my...space hangin some

lookin at naked chicks huh skooter

aint found a nekkin one yet but im lookin

you just aint lookin in the right place so I hear . My buddy was tellin bout one on there the other night that said she was into bikers and ruff sex . I ask him if he got her email address

  yeah ya gotta start somewhere, found a few nice ;D ones    

I hattin never been on there . I am gonna have to check in there one night just to check it out . I here alot of people talk bout it but I just aint never been on there

I will have to try it out one of these nights

I guess we will never get to see a current picture of ding since he won't answer on his own website.......ha...just kiddin....ding and I go a ways back...would probably break the camera anyway....ha

Yo!  I think its that time a year everyone is trying to get their yard stuff done, I know I am. Sposed to be in the low 70;s today, and we are ridingg!!!  Robin

hey guys!  Shtt weather, doin' little odds and ends around the hut.  Now chillin and drinkin.

Crack

well heres to ya craQi:wave:toast2

backatcha, Andy!  I'm still swappin the  litter around.

Happy Saturday Night!

Craqi

What up skoot

whered ya go brutha i is here mayn  

ah just lookin at sum tattoo cheut man

aww L mayn do ya have any

got 2

i only gotts 1 mayn   a super man S on the left side of my neck

I got my yunguns name in old english on my left upper arm and one of dem preppy azz tribal arm bands under it

haaahaahaaaaa once im rich an famous im gonna have sleeves done  left arm first  startin with a primary chain cuff

now them are cool I thought bout one of them primary cuffs on my other arm

  then a v-twin in clouds an some other stuff an on an on

want know whether to listen to you or read ya when you get all them tattoos . HAHAHAHA

L mayn just dreamin ya know

yeah I always thought I might like to have sleeves but I thank my folks would prolly chit a gold brick . but that might be a good thing cause I could send you the money to finish yours then huh

well L yeah i gave up givin a crap bout what my folks think bout me long time ago   when i started payin my bills at my house

yeah well I should be that away my wife raises sand with me all the time bout them always tellin us what to do and how to do it . it is one more b**** fest round here most the time man . I got more bosses than carter got liver pills

  well i aint gonna be one ta preach at ya

well thats good one less thang

naww i know how that stuff is

yeah I live 2 driveways down from mine

well i live about 20 miles from mine an some times thats to close ;D

I knows what you mean .

im here

crack man that dont look like no parsley  ;D

my little bro is sleeved up real good.  His wife and mom in law at tatooed.  Our grandpa was tatooed.  It's nothing in our clan.

Crac

yeah i seen some of his tatts that ya posted nice work too

that image was huge, forgot this site doesn't auto-size. Sorry

No, not exactly parsley, mon.

aww mayn i can smell it from here

yeah me too . if eat sumthin like that I would sheut like a crippled coon

heheeeheeeeheeeee   hey crack is that all gone brutha

hey thats great i learned that way

Yep...I got a piston that I keep right out were everyone can see it.  It has a valve stuck in it.  It reminds me not to get to carried away with some of my hairbrained ideas...lol.  So I rebuilt the mill again and blew it up again.  Same thing but the valve didn't stick in the piston this time....it just kinda folded in half.   I quit tryen that combonation of cam and pistons.  lol